Installation:
Put the light bar on the top of the vehicle,release the base bolt,adjust the bracket of the light bar to fit reasonable with the vehicle,tighten the bolt and then install the hook,adjust the length of the hook to make it is tightly and the then tighten the bolt.Please be careful do not scratch the vehicle.
Operation and maintenance:
1).After the installation and the adjustment,the light bar can be run when you power on and turn the light control switch.
2) Check the bolt of the bracket,hook and the leads termly to ensure the light bar in a secure condition.The light bar should be fixed tightly on the vehicle.
3) To keep the light bar newly,regular cleaning job is necessary according to the instance; please use the soft cloth with neutral detergent. Do not use alcohol,petrol or other organic dis solvent to clean the light bar/ bracket/ hook.
Notice
1) Make sure the voltage of the light bar is the same as the voltage of
the vehicle,
2) Please do not use the light bar for a long time when power off the vehicle because the big power of he light bar.
3) the product be controlled with micro-chip,if possible die or can not work normally,please power off and 10 seconds later it will be restored.
4) High voltage inside the light bar,be careful and it is only for
Packing List
Light bar 1PC
Hook 1set
Controller 1PC
Post time: Oct-18-2022